Seam lines shown. Region colors are role-default — fabric assignments happen on the Design Wall.

Patchwork

Bow Tie

A four-patch bow tie: two feature squares form the bows on one diagonal; each background square on the other diagonal gets a small feature knot folded into its inner corner by the connector-corner (stitch-and-flip) method. Cut a full 6½″ background square and a 2½″ knot square, sew the knot across the corner on the diagonal, then trim — no set-in seam.

Cut list

Dimensions for a 12 inch finished block with a standard 1/4 inch seam allowance. Scale proportionally for other finished sizes.

RegionRolePiecesCut size
Feature 1Feature16 1/2" × 6 1/2"
Feature 2Feature16 1/2" × 6 1/2"
Feature 3Feature12 1/2" × 2 1/2"
Background 1Background16 1/2" × 6 1/2"
Feature 4Feature12 1/2" × 2 1/2"
Background 2Background16 1/2" × 6 1/2"

How it goes together

  1. Step 1

    Cut your pieces

    Cut each region using the dimensions in the cut table for a 12 inch finished Bow Tie block. Standard 1/4 inch seam allowance is included.

  2. Step 2

    Sew sub-units

    Sew the smallest units first (half-square triangles, flying geese, four-patches), then build outward.

  3. Step 3

    Assemble the block

    Join the sub-units into rows or columns, then join the rows. Press as you go. Square the finished block to size.

Try the Bow Tie on a real layout.

Open it on the Design Wall. Try a few colors, see the math, change your mind.